Fanuc Power Mate i-D/H Maintenance Manual

I. MAINTENANCE WITH DISPLAY
LINK TYPED TOUCH PANEL
B63175EN/03
APPENDIX
678
(1) (4)(3)(2)
LEDR1
Red
Meaning of LED and countermeasure
LEDG4
Green
LEDG3
Green
LEDG2
Green
j j J J 1 Illegal condition of CPU on display unit is detected. (IRQ0)
Turn off and on the power again. If problem occurs frequently,
exchange the board of display unit.
2 Illegal condition of CPU on display unit is detected. (IRQ1)
Turn off and on the power again. If problem occurs frequently,
exchange the board of display unit.
J j J J 1 Illegal condition of CPU on display unit is detected. (IRQ2)
Turn off and on the power again. If problem occurs frequently,
exchange the board of display unit.
2 Illegal condition of CPU on display unit is detected. (IRQ3)
Turn off and on the power again. If problem occurs frequently,
exchange the board of display unit.
j J J J 1 Illegal condition of CPU on display unit is detected. (IRQ4)
Turn off and on the power again. If problem occurs frequently,
exchange the board of display unit.
2 Illegal condition of CPU on display unit is detected. (IRQ5)
Turn off and on the power again. If problem occurs frequently,
exchange the board of display unit.
J J J J 1 Illegal condition of CPU on display unit is detected. (IRQ6)
Turn off and on the power again. If problem occurs frequently,
exchange the board of display unit.
2 Illegal condition of CPU on display unit is detected. (IRQ7)
Turn off and on the power again. If problem occurs frequently,
exchange the board of display unit.
3 Illegal condition of CPU on display unit is detected. (OTHERS
INTERRUPT)
Turn off and on the power again. If problem occurs frequently,
exchange the board of display unit.
The functions below are restricted as follows during use of the touch panel
function.
Macro executor
D The macro executor is enabled only for execution macros.
D The hardware cursor cannot be used.
I.9
RESTRICTION

Leave a Reply

Your email address will not be published. Required fields are marked *