Fanuc Power Mate i-D/H Maintenance Manual

INDEX
B63175EN/03
i5
Replacing the fuse, 186
Replacing the MDI keyboard, 184
Replacing the printedcircuit board for the LCD with touch
panel, 184
Restoring a CNC data file, 611
Restriction, 673, 678
ƠSơ
Screen configuration and operating procedure, 507
Screen display, 26, 28, 87
Screen display and operation, 82
Screen display and setting, 97
Screen displayed immediately after power is turned on, 20
Selecting the PMC programmer menu, 307
Separating signal lines, 224
Servo alarms, 457
Servo tuning screen, 374
Setting, 596
Setting and display unit, 160
Setting and display unit backlight replacement and adjustment,
203
Setting and displaying system parameters (SYSTEM PARAM),
308
Setting in normal operation, 561
Setting input/outputrelated parameters, 250
Setting module screen, 21
Setting of I/O module for connector panel, 216
Setting parameters for input/output, 233
Setting screen display and setting, 103
Setting the input signal or output signal to be recorded in the
operation history, 32
Setting up BOOTINIT.EXE, 573
Setting/display/maintenance using the main unit of the Power
Mate i, 546
Setting/maintenance using the Power Mate i main unit, 553
Signal summary (in order of function), 343
Slave, 620
Slot status display, 20
Soft keys, 2
Software configuration screen, 24
SPC alarms, 458
Specification, 281
Specification of PMC, 281
Specifications of memory cards that are not allowed to be used,
534
Spindle alarms, 458
Spindle alarms (serial spindle), 495
Spindle monitor screen, 388
Spindle setting and tuning screen, 385
Spindle setting screen, 386
Spindle tuning screen, 387
SRAM DATA BACKUP screen, 516, 580
SRAM memory card, 528
Starting and stopping the sequence program (RUN/STOP), 313
Starting the boot system, 506
Startup procedure, 583
Status display of the LED on the cabinet of CNC, 676
Status indication with no alarm generated, 548
Status screen display and setting, 98
Storing the sequence program into flash EEPROM (I/O), 315
Supplements, 47
Supported and unsupported cards, 527
Supported functions, 541
Switches and LED, 547
System configuration screen, 23
SYSTEM DATA CHECK screen, 577
System data check screen, 511
SYSTEM DATA DELETE screen, 578
System data delete screen, 513
SYSTEM DATA LOADING screen, 576
System data loading screen, 509
SYSTEM DATA SAVE screen, 514, 579
System file and user file, 574
System files and user files, 506
System reserve area of internal relay, 283
System software configuration, 121
ƠTơ
The CRT control PCB fuse, 188
The CRT display, 212
The external I/O card D, E fuses, 192
The Power Mate controller fuse, 186
Total connection diagram, 114
Troubleshooting, 396
Tuning S analog voltage (D/A converter), 395
ƠUơ
Using a flash memory formatted by the boot system in a
different vendors system, 529
Using a flash memory formatting by a different vendors system
in the boot system, 529
Using BOOTINIT.EXE, 572
Using DPLMDI.EXE, 585
ƠVơ
Virtual MDI keyboard (cusor menu), 663
Virtual MDI keyboard in case that separate type MDI is used,
665
Virtual MDI keyboard in PMC maintenance screen (function
menu), 662

Leave a Reply

Your email address will not be published. Required fields are marked *