Fanuc Power Mate i-D/H Maintenance Manual

FANUC Power Mate i - MODEL D/H
The parameter set supporting screen
function
TITLE
Add the following description as chapter 1.4 “Parameter set supporting screen” after chapter
1.3 “SYSTEM CONFIGUURATION SCREEN” and advance the chapter number of following
chapters.
1.4
Parameter set supporting screen function
1.4.1 General
In the parameter set supporting screen, the CNC parameters necessary
for the system start-up are grouped, and the relating parameters are
gathered in one screen. As the necessary CNC parameters can be set at
a time, machine start-up becomes more easily. And the servo tuning
screen and spindle tuning screen are displayed simply, then it is possible
to adjust smoothly.
This function cannot be used with DPL/MDI or DPL/MDI operating
package.
1.4.2 Screen display
Display method
To display the parameter set supporting screen, there are two methods as
follows.
(1)
The parameter set supporting screen is displayed by pressing the
key.
Parameter diagnose parameter set supporting screen
SYSTEM
When the parameter No. 3195#2(CPR) is set to 1, this method is
effective.
(2)
Press the key.
SYSTEM
Press the continuous menu key several times, then the
[PRMTUN] soft key is displayed.
By pressing the [PRMTUN] soft key, parameter set supporting screen
is displayed.
EDIT
DATE DISIGNE
DESCRIPTION
DRAW
B-63175EN/03-8
SHEET
2/11
APPROV.
FANUC LTD
New design 030207
01

Leave a Reply

Your email address will not be published. Required fields are marked *