FANUC Power Mate i - MODEL D/H
The parameter set supporting screen
Display of menu screen
In order to return to the menu screen of parameter tuning after selecting the
item, operate the following.
[NO.SRH] [ INIT ] [G_INIT] [ ] [ INPUT]
Press the continuous menu key , and then the [MENU] soft key is
[ MENU ] [ ] [ ] [ ] [ ]
Press the [MENU] soft key, then parameter set supporting screen is
displayed. By above operating, the screen can be returned to the
parameter set supporting screen from the “FSSB (AMP)”, “FSSB(AXIS)”,
“SERVO SETTING” and “SPINDLE SETTING” screen.
1.4.4 [2. TUNING]
In the item of “TUNING”, the Servo Tuning screen or the Spindle Tuning
screen is displayed simply and the adjustment is performed easily.
In the menu screen of Parameter Tuning screen, position the cursor to the
desired item to be displayed and press the soft key [SELECT], then the
each tuning screen is displayed.
SERVO TUNING :Display the Servo Tuning screen.
SPINDLE TUNING :Display the Spindle Tuning screen.(only
For the detail of each tuning screen, refer to the “DIGITAL SERVO” and
“AC SPINDLE” in this manual.
1. On the parameter set supporting screen, reading and punching operation of
parameter cannot be executed.
2. To set the standard value is effective only on the “AXIS SETTING” and the
“other screen” of parameter set supporting screen. On the usual parameter
setting screen, the standard value cannot be set.
3. If the standard value does not exist for the parameter that is selected by
cursor and press the soft key [INIT], the warning of “HERE IS NO
INIT-VALUE” is displayed.
4. If the standard value does not exist for any parameters in the group and
press the soft key [G_INIT], the warning of “HERE IS NO INIT-VALUE” is
New design 030207