Fanuc Power Mate i-D/H Maintenance Manual

FANUC Power Mate i - MODEL D/H
The parameter set supporting screen
function
TITLE
Menu item Group Parameter no. Brief explanation
AXIS
SETTING
BASIC 1008#2
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
The relative coordinates is
0:not rounded
1:rounded by one rotation(standard)
1010
(Nothing)
Number of cnc-controlled axes
1020
(X)
(Y)
(Z)
Program axis name for each axis
1st-axis=88
2nd-axis=89
3rd-axis=90
1022
(1)
(2)
(3)
Setting correspondence of each axis
to the axis of the basic coordinate
system(0-7)
1023
(Nothing)
Order of the servo axis
1815#1
(Nothing)
Separate pulse coder
0:not used
1:used
1815#4
(Nothing)
Machine position and position on
absolute position detector
0:do not correspond
1:correspond
1815#5
(Nothing)
Select position detector
0:incremental position detector
1:absolute position detector
1825
(Nothing)
Servo loop gain for each axis
1826
(Nothing)
In-position width for each axis
1828
(Nothing)
Positioning deviation limit for each
axis in movement
= rapid feed rate / 60 / loop gain
1829
(500)
(500)
(500)
(500)
(500)
(500)
(500)
(500)
Positioning deviation limit for each
axis in the stopped state
Standard setting value:500
EDIT
DATE DISIGNE
DESCRIPTION
DRAW
B-63175EN/03-8
SHEET
9/11
APPROV.
FANUC LTD
New design 030207
01

Leave a Reply

Your email address will not be published. Required fields are marked *