Fanuc Power Mate i-D/H Maintenance Manual

Ed
Pa
g
e
11 / 14
Date
Si
g
n
Co
n
te
n
ts
Power Mate
i
-MODEL D/H
Corresponding to
α
i series servo
B-63175EN/03-13
07/11/30
01
N
ewly make out
TITLE
DRAWING
Display screen handling
Mode Key operation Usage
Reference
(*1)
Page key Change servo information screen into one of next
axis.
Soft key
[INPUT]
[CANCEL]
[CHANGE]
[SAVE]
[RELOAD]
ID information at the cursor position is changed to
the character string in key input buffer.
Delete the character string in key input buffer
ID information at the cursor position is transferred
from servo into key input buffer. Only the item to
which '*'(*3) is displayed on the left side is effective.
ID information changed on the servo information
screen is saved on FLASH-ROM module.
ID information changed on the servo information
screen is canceled, and the reload from
FLASH-ROM module.
Page key Change servo information screen into one of next
axis.
Editing
(*2)
Cursor key Move the cursor to change the selected item
1 Reference mode --- in case that 3194#5 is 0
2 Edit mode --- in case that 3194#5 is 1
3 Servo information is saved in the FLASH-ROM. If there is a difference
between Servo information in FLASH-ROM and servo information on servo
I/F, for example servo amplifier is exchanged for different one, '*' is
displayed on the left side as follows.
Note
This screen is unavailable with a combination of the DPL/MDI
and DPL/MDI operation package.

Leave a Reply

Your email address will not be published. Required fields are marked *