Fanuc Power Mate i-D/H Maintenance Manual

- 13 -
Attach the Pulsecoder in such a direction that the power
connector of the servo motor and the feedback cable of the
Pulsecoder face the same direction or that the thermistor
connection parts of the servo motor and Pulsecoder match each
other (see the figure at left).
<4> Fastening the Pulsecoder with the four M4 hexagon socket head cap screws in the reverse order of removing the Pulsecoder
(<1>). (Appropriate torque: 1.5 Nm)
Adjust the connection parts
Thermistor connector
Pulse coder Servo motor

Leave a Reply

Your email address will not be published. Required fields are marked *