Fanuc Power Mate i-D/H Maintenance Manual

- 20 -
(3) Spindle amplifier
STATUS LED
position
STATUS
display
Description
The STATUS LED is off.
Control power has not been supplied, cable is faulty, or control
power circuit is defective.
After control power is turned on, the spindle software series is
displayed (for approx. 1 second).
The last two digits of the spindle software series number are
displayed.
The spindle software version is displayed (for approx. 1 second
following the display of the spindle software series).
[Display] 01,02,03,・・・ [Version] A, B, C,・・・
Blink Blink
The CNC is not powered on (- - blinks).
Waiting for serial communication and parameter loading completion.
Parameter loading completed
The motor is not excited.
Ready status
The spindle motor is excited.
Alarm status
The alarm type is indicated by the character displayed.
Nameplate
Error status (invalid sequence or parameter setting error)
The error type is indicated by the character displayed.

Leave a Reply

Your email address will not be published. Required fields are marked *