Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
1. DISPLAY AND OPERATION
71
Clear
Function
KEY
SW
SETTING
PWE=1
Mode
Function
key
Operation
Memory all clear When the
power is on
_
CRT/MDI
RESET and DELETE or 7 and 9
Path 1 side : CAN and 1
At 2path control (with Power Mate iD2)
Psth 2 side : CAN and 2
LCD with touch panel
Turn on the power while holding down
the topright corner of the screen.
Display the IPL screen, then
RST [SELECT] [YES]
DEL [SELECT] [YES] [YES]
or
7 [SELECT] [YES]
9 [SELECT] [YES] [YES]
At 2path control (with Power Mate iD2)
Path 1 side:
CAN [SELECT] [YES]
1 [SELECT] [YES] [YES]
Path 2 side:
CAN [SELECT] [YES]
2 [SELECT] [YES] [YES]
Parameters/offset clear f When the
power is on
_ CRT/MDI
RESET
Path 1 side : RESET and 1
At 2path control (with Power Mate iD2)
Path 2 side : RESET and 2
LCD with touch panel
Turn on the power while holding down
the topright corner of the screen.
Display the IPL screen, then
RST [SELECT] [YES] [EXIT]
[YES]
At 2path control (with Power Mate iD2)
Path 1 side:
RST [SELECT] [YES]
1 [SELECT] [YES] [YES]
Path 2 side:
RST [SELECT] [YES]
2 [SELECT] [YES] [YES]

Leave a Reply

Your email address will not be published. Required fields are marked *