Fanuc Power Mate i-D/H Operation Maintenance Handbook

3. G CODE
85
G code list (2/2)
G code FunctionGroup
G90
03
Absolute command
G91
03
Increment command
G92
00
Setting for workpiece coordinate system or clamp at
maximum spindle speed
G93 Rate feed
G94
05 Feed per minute
G95 Feed per rotation
G96 Constant surface speed control
G97
13
Constant surface speed control cancel
G130 Multipath control
G135.1 00 High–speed response function continuous feed
G140 Phase adjustment using the electronic cam function
G145 Mechanical synchronization
G146
05
Start–point synchronization
NOTE Maximum spindle speed clamp (G92), which is a G code in groups
09 and 13 is effective to the Power Mate iD only.
G05, G130, G135.1, G140, and G146 are effective to the Power
Mate iH only.

Leave a Reply

Your email address will not be published. Required fields are marked *