Fanuc Power Mate i-D/H Operation Maintenance Handbook

3
1
4
5
6
7
8
9
10
2
SAFETY PRECAUTIONS
s–10
WARNING
2. Absolute pulse coder battery replacement
When replacing the memory backup batteries, keep the
power to the machine (CNC) turned on, and apply an
emergency stop to the machine. Because this work is
performed with the power on and the cabinet open, only
those personnel who have received approved safety and
maintenance training may perform this work.
When replacing the batteries, be careful not to touch the
high–voltage circuits (marked
and fitted with an
insulating cover).
Touching the uncovered highvoltage circuits presents
an extremely dangerous electric shock hazard.
NOTE
The absolute pulse coder uses batteries to preserve its
absolute position.
If the battery voltage drops, a low battery voltage alarm is
displayed on the machine operators panel or Zscreen.
When a low battery voltage alarm is displayed, replace the
batteries within a week. Otherwise, the absolute position data
held by the pulse coder will be lost.
Refer to the SERVO MOTOR α series Maintenance Manual or
SERVO MOTOR β series Maintenance Manual.

Leave a Reply

Your email address will not be published. Required fields are marked *