6. RENAMING OF PMC MODELS
This manual presents programming descriptions for the PMC models
listed in the following table. Note that some models have been renamed;
in the product name column, the old names are enclosed in
parentheses, while the new names appear above the old names.
However, the previous specifications are still applied to the renamed
models. Thus, when using the renamed models, users should:
D Read the old names shown in this manual as the new names.
D Read the old names appearing on the units as the new names.
Table. PMC Model Name
Product Name Abbreviations
FANUC PMC–MODEL SB5
(Old name: FANUC PMC–MODEL RB5)
FANUC PMC–MODEL SB6
(Old name: FANUC PMC–MODEL RB6)