Fanuc Power Mate i-D/H Operation Maintenance Handbook

7. HARDWARE
209
Primary
ExplanationTertiary
and sub-
sequent
operation
Secondary
Restores data from a memory card in a batch.
D The SRAM data, ladder program, C executor user program,
and macro executor user program saved on the memory card
in a batch by selecting 8 as the primary selection with the
rotary switch are restored in a batch.
D After completing the primary selection, pressing the pushbut-
ton switch again starts processing.
D After processing starts, the indication on the 7segment LED
changes as follows:
(Low–speed blinking) :
Restoration in progress.
Executed after the pushbutton switch is
pressed.
(On) : Normal termination
(On) : An alarm is generated.
(Abnormal memory card, the write protect
switch set to OFF, and so forth)
Restores system files in a batch (restoration from a memory card).
D All the system files that can be loaded into the FROM are re-
stored in a batch.
D After completing the primary selection, pressing the pushbut-
ton switch again starts processing.
D After processing starts, the indication on the 7segment LED
changes as follows:
(Low–speed blinking) :
Restoration in progress (executed after the
pushbutton switch is pressed)
(On) : Normal termination
(On) : An alarm is generated. (Abnormal
memory card, write protect switch set to
OFF, and so forth)

Leave a Reply

Your email address will not be published. Required fields are marked *