Fanuc Power Mate i-D/H Operation Maintenance Handbook

3
1
4
5
6
7
8
9
10
2
212
8.1 How to Enter the Parameters
(1) Enabling writing the parameters
1 Press the
SETTING
OFFSET
key several times to display the handy screen for
setting.
2 Move the cursor to the PARAMETER WRITE field and enter
1
and then
INPUT
.
3 Alarm 100 occurs. Press the
CAN
and
RESET
keys simultaneously
to temporarily stop the alarm.
(2) Entering the parameters
1 Press the
SYSTEM
key on the MDI panel several times to select the
parameter screen.
PARAMETER (SETTING) O1234 N12345
0000 SEQ INI ISO TVC
00000000
0001 FCV
00000000
0012 RMV MIR
X00000000
Y00000000
Z00000000
B00000000
0020 I/O CHANNEL 0
S 0 T0000
ZRN **** *** *** 10:15:30
[PARAM] [DGNOS] [PMC] [SYSTEM] [(OPRT)]
2 Pressing soft key [(OPRT)] displays the operation menu including
the items below.
Enter a parameter number and press [NO.SRH] : Searches for the
specified number.
Soft key [ON:1] : Sets the value at which the cursor is positioned to 1.
(Only for bit parameters)
Soft key [OFF:0] : Sets the value at which the cursor is positioned to 0.
(Only for bit parameters)
Soft key [+INPUT]: Adds the entered value to the value at which the
cursor is positioned. (Only for word parameters)
Soft key [INPUT]: Sets the value at which the cursor is positioned to
the entered value. (Only for word parameters)
Soft key [READ] : Inputs parameters from the reader/punch interface.
Soft key [PUNCH] : Outputs parameters to the reader/punch interface.
3 Convenient methods for entering data
3–1 To change data in units of bits
Pressing
or changes the cursor to 1-bit size,
which enables setting data in units of bits (only for bit
parameters).
8. PARAMETERS

Leave a Reply

Your email address will not be published. Required fields are marked *