Fanuc Power Mate i-D/H Operation Maintenance Handbook

8. PARAMETERS
219
4) Parameters for the DPL/MDI operation package
Number
Contents Remarks
370 DPL/MDI operation package
#1 PCTD1: Only absolute coordinates and machine
coordinates (0)/absolute coordinates (1) are
displayed on the CRT when the “DPL/MDI
operation package is connected.
380 DPL/MDL operation package communication
establishment request packet transmission
time interval
381 DPL/MDL operation package connection
confirmation request packet transmission time
interval
382 DPL/MDL operation package response
packet waiting timeout time
383 DPL/MDL operation package key input repeat
detection time (first time)
384 DPL/MDL operation package key input repeat
detection time (second and subsequent times5
5) Parameters for Ethernet
Number
Contents Remarks
0704 First IP address of the NC
0705 Second IP address of the NC
0706 Third IP address of the NC
0707 Fourth IP address of the NC
0712 First mask address for the IP address of the
network
0713 Second mask address for the IP address of the
network
0714 Third mask address for the IP address of the
network
0715 Fourth mask address for the IP address of the
network
0720 First IP address of the router
0721 Second IP address of the router
0722 Third IP address of the router
0723 Fourth IP address of the router
0724 Port number for TCP
0725 Port number for UDP
0726 Time interval

Leave a Reply

Your email address will not be published. Required fields are marked *