Fanuc Power Mate i-D/H Operation Maintenance Handbook

3
1
4
5
6
7
8
9
10
2
278
Number RemarksContents
6109 First variable number displayed on pattern data
screen 9
6110 First variable number displayed on pattern data
screen 10
25) Positioning by optimul acceleration
Number
Contents Remarks
6131 Positioning by optimul acceleration <Axis>
#0 OAD : The function for positioning by optimul
acceleration is disabled (0)/enabled (1)
#1 EOA : Positioning by optimum acceleration is disabled
(0)/enabled (1) for movement by PMC axis
control.
6132 Positioning by optimul acceleration
#0 ILG : In the function for positioning by optimum
acceleration, loop gain switching is performed
(0)/not performed (1).
6136 Distance D1 to the first stage
6137 Distance D2 to the second stage
6138 Distance D3 to the third stage
6141 Distance D1 for level 1 (metric input)
6142 Distance D2 for level 2 (metric input)
6143 Distance D3 for level 3 (metric input)
6144 Distance D4 for level 4 (metric input)
6145 Distance D5 for level 5 (metric input)
6146 Distance D6 for level 6 (metric input)
6151 Distance D1 to the first stage (for inch input)
6152 Distance D2 to the second stage
(for inch input)
6153 Distance D3 to the third stage (for inch input)
6154 Distance D4 to the fourth stage (for inch input)
6155 Distance D5 to the fifth stage (for inch input)
6156 Distance D6 to the sixth stage (for inch input)
6161 First–stage rapid traverse rate <Axis>
6162 Second–stage rapid traverse rate <Axis>
6163 Third–stage rapid traverse rate <Axis>
6164 Fourth–stage rapid traverse rate <Axis>
6165 Fifth–stage rapid traverse rate <Axis>

Leave a Reply

Your email address will not be published. Required fields are marked *