Fanuc Power Mate i-D/H Operation Maintenance Handbook

3
1
4
5
6
7
8
9
10
2
10
1.2.3 Display for handle interrupt
(1) Press soft key [HNDL].
The distance traveled due to a handle interrupt is displayed.
ABS
[][][][][]
REL ALL HNDL OPRT
HANDLE INTERRUPTION O0000 N02000
The displayed unit is switched between inch and
metric (by setting in G20 and G21)
(INPUT UNIT)
X 69.594
Y 137.783
Z –61.439
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M S 0 T0000
MEM **** *** *** 10:29:51
Displayed in
the unit
specified by
parameter INM
(bit 0 of
No.100)
(mm/inch)
(OUTPUT UNIT)
X 69.594
Y 137.783
Z –61.439
(RELATIVE)
X 0.000
Y 0.000
Z 0.000
(DISTANCE TO GO)
X 0.000
Y 0.000
Z 0.000
(2) Operation
Soft key [(OPRT)] [PTSPRE] [EXEC]
[RUNPRE] [EXEC]
(3) Related signals
DGN
#7
#6 #5 #4 #3 #2 #1 #0
G041
HS2ID HS2IC HS2IB HS2IA HS1ID HS1IC HS1IB HS1IA
DGN
#7
#6 #5 #4 #3 #2 #1 #0
G042
HS3ID HS3IC HS3IB HS3IA
NOTE HS3In is effective only in the PM i–H.

Leave a Reply

Your email address will not be published. Required fields are marked *