Fanuc Power Mate i-D/H Operation Maintenance Handbook

8. PARAMETERS
287
Number RemarksContents
7202
#6 NS2 : The generalpurpose switches on the software
operator’s panel are used (0)/not used (1).
#7 NS0 : The software operators panel is used (0)/not
used (1).
7210 Numeric key used as the + direction key of the
first axis for jog feed on the software operator’s
panel
7211 Numeric key used as the direction key of the
first axis for jog feed on the software operator’s
panel
7212 Numeric key used as the + direction key of the
second axis for jog feed on the software
operator’s panel
7213 Numeric key used as the direction key of the
second axis for jog feed on the software
operator’s panel
7214 Numeric key used as the + direction key of the
third axis for jog feed on the software
operator’s panel
PMi–H
7215 Numeric key used as the direction key of the
third axis for jog feed on the software
operator’s panel
PMi–H
7216 Numeric key used as the + direction key of the
fourth axis for jog feed on the software
operator’s panel
PMi–H
7217 Numeric key used as the direction key of the
fourth axis for jog feed on the software
operator’s panel
PMi–H

Leave a Reply

Your email address will not be published. Required fields are marked *