Fanuc Power Mate i-D/H Operation Maintenance Handbook

8. PARAMETERS
297
Number RemarksContents
8589 Minimum value in the operating range of the
tenth highspeed position switch (for the
normal type) or the point at which the tenth
high–speed position switch turns OFF (for the
direction determination type)
8590 Minimum value in the operating range of the
eleventh highspeed position switch (for the
normal type) or the point at which the eleventh
high–speed position switch turns OFF (for the
direction determination type)
8591 Minimum value in the operating range of the
twelfth highspeed position switch (for the
normal type) or the point at which the twelfth
high–speed position switch turns OFF (for the
direction determination type)
8592 Minimum value in the operating range of the
thirteenth highspeed position switch (for the
normal type) or the point at which the thirteenth
high–speed position switch turns OFF (for the
direction determination type)
8593 Minimum value in the operating range of the
fourteenth highspeed position switch (for the
normal type) or the point at which the
fourteenth highspeed position switch turns
OFF (for the direction determination type)
8594 Minimum value in the operating range of the
fifteenth highspeed position switch (for the
normal type) or the point at which the fifteenth
high–speed position switch turns OFF (for the
direction determination type)
8595 Minimum value in the operating range of the
sixteenth highspeed position switch (for the
normal type) or the point at which the sixteenth
high–speed position switch turns OFF (for the
direction determination type)
42) Others
Number
Contents Remarks
8650 Key code
#0 RSK : Upon reset, key codes are not passed to the
application (0)/passed to the application (1).
#1 CNA : If an NC alarm is issued while the C executor
user screen is displayed, the screen is
changed according to PRM3111#7 (0)/is not
changed (1).

Leave a Reply

Your email address will not be published. Required fields are marked *