Fanuc Power Mate i-D/H Operation Maintenance Handbook

9. ERROR CODE LIST
309
Number ContentsMessage
5225 ILLEGAL MACRO
EXECUTOR
A macro library for the Power Mate i
MODEL H is registered in the Power
Mate iMODEL D. Alternatively, a
macro library for the Power Mate i
MODEL D is registered in the Power
Mate iMODEL H.
5226 ILLEGAL C LANGUAGE
EXECUTOR
A C library for the Power Mate i
MODEL H is registered in the Power
Mate iMODEL D. Alternatively, a C
library for the Power Mate i–MODEL
D is registered in the Power Mate i
MODEL H.
5240 ALL PROGRAMS HAVE
BEEN DELETED
Because the number of digits of a
program number was changed, all
the programs were deleted.
5246 ELECTRONIC CAM
PARAMETER ILLEGAL
An error is found in the following
electronic cam parameters. Correct
the setting.
Parameter No. 8086 (cam shaft axis
number)
Parameter No. 8087 (followup axis
selection)
Parameter No. 8088 (number of cam
shape data items)
Bit 0 of parameter No. 1006 (rotation
axis setting)
Bit 0 of parameter No. 1008 (rollover
setting)
Parameter No. 1260 (travel distance
per rotation of the rotation axis)
5247 CAM DATA ILLEGAL D The cam data checksum is ille-
gal.
D The cam shaft phase number of
cam data is illegal.
D Cam data transfer failed.
5248 CAM DATA AREA
INSUFFICIENT
D Because of the absence of the
option of part program storage
equivalent to the 160 m or more
tape, an enough area for storing
cam data cannot be allocated.
D Because the amount of cam data
is too large, the storage area be-
comes insufficient.
5249 ELECTRONIC CAM CAN
NOT EXECUTE
Phase matching or electronic cam
operation could not be executed for
one of the following reasons:
D Phase matching was performed
without storing cam data.
D Electronic cam operation was
executed before phase matching
was not completed.
D The electronic cam function was
executed while movement along
an axis was being performed by
another function.
5261 PMC INDIRECT COMMAND
IS ILLEGAL
An indirect command for PMC axis
control is illegal.

Leave a Reply

Your email address will not be published. Required fields are marked *