Fanuc Power Mate i-D/H Operation Maintenance Handbook

9. ERROR CODE LIST
311
Nom-
ber
Message Contents
Counter
plan
Reference
1000 to
1999
A message created
by the user or
machine tool
builder, using the
PMC alarm
message function,
is displayed.
Alarm gener-
ated by the
user or ma-
chine tool
builder using
the PMC
Apply appropri-
ate counter-
measures as
explained in
the manual pro-
vided by the
machine tool
builder.
Manual pro-
vided by
machine
tool builder
3000 to
3200
A message created
by the user or
machine tool
builder, using a
custom macro, is
displayed.
Alarm gener-
ated by the
user or ma-
chine tool
builder, using
a custom
macro
Apply appropri-
ate counter-
measures as
explained in
the manual pro-
vided by the
machine tool
builder.
Manual pro-
vided by
machine
tool builder
3000 to
3099
P/S ALARM Alarm gener-
ated by the
user or ma-
chine tool
builder, using
the PMC
alarm display
function
Manual pro-
vided by ma-
chine tool
builder
Manual pro-
vided by
machine
tool builder
9.1.2 Background edit alarm (BP/S alarm)
Number Message Contents
??? BP/S alarm BP/S alarm occurs in the same num-
ber as the P/S alarm that occurs in
ordinary program edit. (070, 071,
072, 073, 074 085,086,087 etc.)
140 BP/S alarm It was attempted to select or delete in
the background a program being se-
lected in the foreground. (Note) Use
background editing correctly.
NOTE Alarm in background edit is displayed in the key input line of the
background edit screen instead of the ordinary alarm screen and
is resettable by any of the MDI key operation.
9.1.3 Absolute pulse coder (APC) alarm
Number Message Contents
300 APC Alarm : nthaxis origin
return
Manual reference position return is
required for the nthaxis (n=1 to 8).
301 APC alarm: nth–axis
communication
nth–axis (n=1 to 8) APC communica-
tion error. Failure in data transmis-
sion
Possible causes include a faulty
APC, cable, or servo interface mod-
ule.
302 APC alarm: nthaxis over
time
nth–axis (n=1 to 8) APC overtime er-
ror.
Failure in data transmission.
Possible causes include a faulty
APC, cable, or servo interface mod-
ule.

Leave a Reply

Your email address will not be published. Required fields are marked *