Fanuc Power Mate i-D/H Operation Maintenance Handbook

3
1
4
5
6
7
8
9
10
2
332
CONTENTSMessages
CREATE ERROR The file name is invalid.
Name the file is the MSDOS format.
NO MORE SPACE
WRITE ERROR
The memory card capacity is insufficient.
Replace the memory card or delete unnecessary
files and retry.
NOT READY The memory card is not mounted.
Confirm if the memory card is mounted correctly.
MOUNT ERROR The memory card is not formatted.
Format the memory card.
WRITE PROTECT The memory card is protected.
Remove the protection of the memory card.
BATTERY ALARM The battery of the memory card is not enough.
Exchange the battery of the memory card.
M
E
FILE NOT FOUND Specified file number or file name is not found.
Confirm the file number or the file name by LIST.
M
O
R
DELETE ERROR The file cannot be deleted.
Change the attribute of the file.
Y
C
PROGRAM ALREADY
EXISTS
The file name already exists.
Change to other file name.
C
A
R
D
I/O WRITE ERROR nn
I/O READ ERROR nn
I/O COMPARE
ERROR nn
I/O DELETE ERROR
nn
I/O LIST ERROR nn
I/O FORMAT ERROR
nn
nn=30 : The memory card is not mounted.
Confirm if the memory card is mounted correctly.
nn=31 : The data cannot be written to the memory
card.
Remove the protection of the memory card.
Exchange the memory card for the SRAM card.
nn=32 : The battery of the memory card is not
enough.
Exchange the battery of the memory card.
nn=102: The memory card capacity is insufficient.
Replace the memory card or delete unnecessary
files and retry.
nn=135: The memory card is not formatted.
nn=105: ditto
Format the memory card.
nn=114: Specified file is not found.
Confirm the file number or the file name by LIST.
nn=115: Specified file is protected.
Confirm the attribute of the file.
C
o
m
m
COMPARE ERR
XXXXXX = AA:BB
CONT?(Y/N)
The data between DEVICE and PMC is different.
XXXXXX : Address
aa : The data in PMC
bb : The data in DEVICE
If you continue it, press Y key.
Otherwise, press N key.
m
o
n
DATA ERROR Invalid data was read.
Check the cable and setting (SPEED).
PROGRAM DATA
ERROR
Data output contains an error.
On the alarm screen, check the details of the alarm.

Leave a Reply

Your email address will not be published. Required fields are marked *