Fanuc Power Mate i-D/H Operation Maintenance Handbook

3
1
4
5
6
7
8
9
10
2
342
(5) Displaying a divided ladder program (WINDOW)
A ladder program can be divided into up to six sections, and the
individual sections displayed on the screen simultaneously.
1 Press the [WINDOW] soft key.
2 Press the [DIVIDE] soft key to divide the dynamic display screen
into the desired number of sections.
: Each time the key is pressed, the screen is divided.
An unselected divided screen
is indicated by a blue low-in-
tensity bar.
LOG1
*SP
ST
A selected divided screen is
indicated by the purple high-
intensity bar.
LADDER
LOG1
DOOR. ST.
* XXX. . . . . . . . . . . . . XXX * MONIT RUN
LOG1
*SP.
NET 0001-0002
SKIP1.
SKIP1
NET 0020-0021
3 To select the desired divided screen, press the [SELECT] soft key
as many times as necessary to move the purple bar to the desired
screen.
: The normal search function can be used within each divided
screen.
4 To change the width of a selected divided screen, press the
[WIDTH] soft key.
D Pressing the [EXPAND] soft key increases the number of lines
displayed on a divided screen.
D Pressing the [SHRINK] soft key decreases the number of lines
displayed on a divided screen.
5 To terminate the display of a selected divided screen, press the
[DELETE] soft key.
: To terminate screen division, press the [CANCEL] soft key.
(6) Dumping (DUMP)
The states of the signals corresponding to a ladder program can be
displayed in hexadecimal, together with the ladder program itself.
1 Press the [DUMP] soft key.

Leave a Reply

Your email address will not be published. Required fields are marked *