Fanuc Power Mate i-D/H Operation Maintenance Handbook

10. PMC
343
LOG1
LOG1
LOG1
*ESP.
*ESP
LOG1 C1
EMERGENCY STOP
END1
G0000 00 1A 5C 32 22 0D 65 10 01 02 00 10 00 00 10 40. . . . . . .
G0016 01 00 10 23 40 0F 03 20 1A FF 00 00 3A 9B 16 84 . . . . . . .
ADDRESS DUMP
* XXX. . . . . . . . . . . . XXX * NET 0001-0004 MONIT RUNLADDER
: When the screen is divided, the states of the signals are displayed
in the lower divided screen.
D To change the data notation
[BYTE] : Data is displayed in units of bytes.
Example) G0000 00 16 84 00 ...
[WORD] : Data is displayed in units of two bytes.
Example) G0000 1600 0084 ...
[D.WORD] : Data is displayed in units of four words,
or four bytes.
Example) G0000 00841600 ...
: When WORD or D.WORD is specified, data is displayed
with the high-order byte placed first.
D To search for an address
Use the
PAGE
,
PAGE
, and [SRCH] keys, as in the normal
search function.
(7) Displaying the function-instruction parameters (DPARA/NDPARA)
The states of the control parameters used in function instructions are
displayed together with the ladder program.
1 Press the [DPARA] soft key.
* XXX. . . . . . . . . . . . XXX * NET 0001-0004 MONIT RUNLADDER
RST ERR1
JOG
JOG FEEDRATE
SUB 27
CODEB
2
6
R002
[ 4]
G014
[ 800]
The current value of a
control parameter is
displayed below the pa-
rameter.

Leave a Reply

Your email address will not be published. Required fields are marked *