Fanuc Power Mate i-D/H Operation Maintenance Handbook

3
1
4
5
6
7
8
9
10
2
358
3 Enter the desired channel number, then press the
INPUT
key to set the
number for CHANNEL.
1 : JD5A of the main CPU board
2 : JD5B of the main CPU board
4 Specify the I/O unit to be used for DEVICE.
HOST: I/O operation with FAPT LADDER (for personal
computer)
FDCAS: I/O operation with a Floppy Cassette Adaptor
F-ROM: I/O operation with a flash EEPROM
M-CARD: I/O operation with a memory card
OTHERS: I/O operation with other I/O units
5 Specify the desired function with FUNCTION.
WRITE: Outputting data
READ: Inputting data
COMPARE: Comparing data in memory with that in an external device
DELETE: Deleting files on a floppy disk or memory card
LIST: Listing the files on a floppy disk or memory card
FORMAT: Formatting a memory card (all data on the memory card
is deleted.)
6 Specify the desired type of data to be output at KIND DATA.
ALL: Ladder programs and executable data
LADDER: Ladder programs
PARAM: PMC parameters
7 When FDCAS or M-CARD is specified for the device, a file can be
specified for FILE NO. by either its file number or file name.
8 Specify the RS-232C conditions for each device with SPEED.
9 Check that the settings are correct. Then, press the [EXEC] soft key.
10.4.3 Copy function (COPY)
Changes made during on-line editing are transferred to the corresponding
editing ladder program.

Leave a Reply

Your email address will not be published. Required fields are marked *