Fanuc Power Mate i-D/H Operation Maintenance Handbook

1. SCREEN DISPLAY AND OPERATION
23
0102
Specification number of the input/output device
0 RS-232-C (Control codes DC1 to DC4 are used.)
1 FANUC Bubble Cassette B1/B2
2 FANUC Floppy Cassette F1
3 PROGRAM FILE Mate
FANUC FA Card adapter
FANUC Floppy Cassette adapter, FSP-H
4 RS–232C
(Control codes DC1 to DC4 are not used.)
5 Portable tape reader
6 FANUC PPR, FSP-G, FSP-H
0103
Baud rate (set transfer rate)
7: 600 9: 2400 11: 9600
8: 1200 10: 4800 12: 19200 [BPS]
NOTE This screen is displayed when the floppy disk drive is specified as
the input/output device for the unit.

Leave a Reply

Your email address will not be published. Required fields are marked *