Fanuc Power Mate i-D/H Operation Maintenance Handbook

1. SCREEN DISPLAY AND OPERATION
47
(2) From the file directory, select the file to be read by following the
procedure below.
1 Using the [UP] or [DOWN] soft key, position the cursor to the file to
be read.
SELECT
[][][][][]
YES NO UP DOWN
SYSTEM DATA LOADING
FILE DIRECTORY
MACRO1. MEM
MACRO2. MEM
LADDER. ROM
END
1/1
***MESSAGE***
SELECT FILE AND HIT SELECT KEY.
To display the
preceding screen
To display the
next screen
D When the file directory is too large to fit on the screen, the screen
can be scrolled by pressing the
or soft key.
D To return to the SYSTEM MONITOR MAIN MENU screen, position
the cursor to END, then press the [SELECT] soft key.
2 Press the [SELECT] soft key.
Any file name can be assigned to the files stored on a memory card.
The system automatically determines the type of a file from its contents
when reading that file.
(3) A confirmation sign appears at the bottom of the screen. To continue
the operation, press the [YES] soft key. To abandon the operation,
press the [NO] soft key.
(4) While a file is being read, the following message is displayed on the
screen.
READ DATA FROM MEMORY CARD
±
F-ROM ERASING
±
F-ROM PROGRAM
±
LOADING COMPLETE
Displaying the
FROM file list
(SYSTEM
DATA CHECK
screen)
³ When reading is terminated, the message, HIT SELECT
KEY,” appears at the bottom of the screen.
(5) Press the [SELECT] soft key to return to the SYSTEM DATA LOADING
screen.

Leave a Reply

Your email address will not be published. Required fields are marked *