Fanuc Power Mate i-D/H Operation Maintenance Handbook

3
1
4
5
6
7
8
9
10
2
50
F Deleting a FROM file (SYSTEM DATA DELETE screen)
NOTE Only user files, such as the ladder and macro P-code programs,
can be deleted. System files, such as NC BASIC, cannot be de-
leted.
(1) Select the SYSTEM DATA DELETE screen.
1 Using the [UP] or [DOWN] soft key, position the cursor to 3.
SYSTEM DATA DELETE.
2 Press the [SELECT] soft key.
FROM files are listed on the screen as follows:
SELECT
[][][][][]
YES NO UP DOWN
SYSTEM DATA CHECK
FILE DIRECTORY
1. NC BASIC(10)
2. DG SERVO(1)
3. PMC0BSC(2)
4. PMC–RB(1)
5. PDIM256K(2)
6. END
***MESSAGE***
SELECT FILE AND HIT SELECT KEY.
(2) Select the file to be deleted.
1 Using the [UP] or [DOWN] soft key, position the cursor to the
desired file name.
2 Press the [SELECT] soft key.
D To quit and return to the SYSTEM MONITOR MAIN MENU
screen, position the cursor to END, then press the [SELECT]
soft key.
3 A confirmation message appears at the bottom of the screen. To
delete the file, press the [YES] soft key. To abandon the deletion,
press the [NO] soft key.
Upon pressing the [YES] soft key, the specified file is deleted.
³ Once the file has been deleted, HIT SELECT KEY appears
at the bottom of the screen.
(3) Press the [SELECT] soft key to return to the SYSTEM DATA CHECK
screen.

Leave a Reply

Your email address will not be published. Required fields are marked *