Fanuc Power Mate i-D/H Operation Maintenance Handbook

1. SCREEN DISPLAY AND OPERATION
51
F Saving a FROM file to a memory card
(SYSTEM DATA SAVE screen)
NOTE Only user files, such as the ladder and macro P-code programs,
can be saved to a memory card. System files, such as NC BASIC,
cannot be saved.
(1) Select the SYSTEM DATA SAVE screen.
1 Using the [UP] or [DOWN] soft key, position the cursor to 4.
SYSTEM DATA SAVE.
2 Press the [SELECT] soft key.
FROM files are listed on the screen as follows:
SELECT
[][][][][]
YES NO UP DOWN
SYSTEM DATA SAVE
FILE DIRECTORY
1. NC BASIC(10)
2. DG SERVO(1)
3. PMC0BSC(2)
4. PMC–RB(1)
5. PDIM256K(2)
6. END
***MESSAGE***
SELECT FILE AND HIT SELECT KEY.
(2) Select the file to be saved.
1 Using the [UP] or [DOWN] soft key, position the cursor to the
desired file name.
2 Press the [SELECT] soft key.
D To quit and return to the SYSTEM MONITOR MAIN MENU
screen, position the cursor to END, then press the [SELECT]
soft key.
3 A confirmation message appears at the bottom of the screen. To
save the file, press the [YES] soft key. To abandon the saving,
press the [NO] soft key.
Upon pressing the [YES] soft key, the specified file is saved to the
memory card.
³
Once the file has been saved, HIT SELECT KEY
appears at the bottom of the screen, together with the
name assigned to that saved file.
SELECT
[][][][][]
YES NO UP DOWN
FILE SAVE COMPLETE. HIT SELECT KEY.
SAVE FILE NAME:PMC–RB.000
Name assigned to
the saved file

Leave a Reply

Your email address will not be published. Required fields are marked *