Fanuc Power Mate i-D/H Operation Maintenance Handbook

3
1
4
5
6
7
8
9
10
2
52
D Saved files are named as follows:
File
FROM file name Memory card file name
Ladder program PMC-RB PMC-RB. xxx
Macro PCODE program
PDIM256K PDIM256K.xxx
PDIM05M PDIM05M.xxx
C language executor
CEX 1.0M CEX_10M.xxx
program
CEX 2.0M CEX_20M.xxx
D A three-digit number (000 to 031) is automatically assigned to a
saved file as the file extension. The file extension will be 000 when
no other files having the same file name have been saved to the
memory card. When a file having the same file name has already
been saved to the memory card, the lowest number currently
available will be assigned.
D The most recently saved file need not necessarily have the highest
extension number because it may be assigned a number that was
previously skipped. Carefully check the file name, displayed at the
bottom of the screen, once saving has been completed.
(3) Press the [SELECT] soft key to return to the SYSTEM DATA SAVE
screen.

Leave a Reply

Your email address will not be published. Required fields are marked *