Fanuc Power Mate i-D/H Operation Maintenance Handbook

1. SCREEN DISPLAY AND OPERATION
53
F Dumping SRAM data to a memory card
(SRAM DATA BACKUP screen)
(1) Select the SRAM DATA BACKUP screen.
1 Using the [UP] or [DOWN] soft key, position the cursor to 5. SRAM
DATA BACKUP.
2 Press the [SELECT] soft key.
The SRAM DATA BACKUP screen is displayed.
SELECT
[][][][][]
YES NO UP DOWN
SYSTEM DATA BACKUP
1. SRAM BACKUP (CNC ³ MEMORY CARD)
2. RESTORE SRAM (MEMORY CARD ³ CNC)
END
SRAM SIZE : 256KB (BASIC)
FILE NAME : SRAM256A. FDB
***MESSAGE***
SELECT MENU AND HIT SELECT KEY.
The size of the SRAM allocated to the
NC is displayed here.
The amount of free memory space de-
creases after formatting, because part
of the memory is taken up by directo-
ries and other data.
Therefore, the use of a large–capacity
memory card is recommended.
(2) Select whether to dump data to the memory card (BACKUP), or to load
data from the memory card (RESTORE).
1 Using the [UP] or [DOWN] soft key, position the cursor to the
desired function.
2 Press the [SELECT] soft key.
D To quit and return to the SYSTEM MONITOR MAIN MENU
screen, position the cursor to END, then press the [SELECT]
soft key.
3 A confirmation message appears at the bottom of the screen. To
perform the selected operation, press the [YES] soft key. To
abandon the operation, press the [NO] soft key.
Upon pressing the [YES] soft key, data transfer between the SRAM
and memory card starts.
³ During data transfer, the name of the file being transferred blinks
as follows:
When dumping data to the memory card
FILE NAME : SRAM256A. FDB MEMORY CARD
When loading data from the memory card
FILE NAME : SRAM256A. FDB CNC
D Backup file data is dumped to the memory card in blocks of 520KB.
D A backup file is named as follows:
SRAMxxx V. FDB
An alphabetic character, representing the file
size in units of 512KB, is assigned sequentially,
starting from A.
SRAM size allocated to NC 256KB:256
1.0MB:1_0
(3) Press the [SELECT] soft key to return to the SRAM DATA BACKUP
screen.

Leave a Reply

Your email address will not be published. Required fields are marked *