Fanuc Power Mate i-D/H Operation Maintenance Handbook

3
1
4
5
6
7
8
9
10
2
56
F Error message list
D The following table lists and describes the error messages which
may be output by the system.
Message Cause and Response
B BOOT ROM PARITY.
PLEASE POWER OFF.
The contents of flash memory containing boot
software was destroyed. Replace the CPU
card.
C CHANGE MEMORY
CARD.
AND HIT YES OR NO.
The memory card becomes full in the middle
of SRAM backup operation. Replace the
card with a memory card containing enough
free space.
D DELETE ERROR.
HIT SELECT KEY.
An attempt to delete a file from flash ROM
was unsuccessful. Retry the deletion. If the
second attempt also fails, the flash ROM may
have been damaged or destroyed. Replace
the flash ROM module.
DEVICE ERROR (CNC x) An attempt to write data to flash ROM was
unsuccessful. Retry the write operation. If
the second attempt also fails, the flash ROM
may have been damaged or destroyed. Re-
palce the flash ROM module.
F FILE SAVE ERROR.
HIT SELECT KEY.
An attempt to write a file to a memory card
was unsuccessful. Check that the memory
card is not damaged.
FLASH MEMORY NO
SPACE
There is insufficient free flash ROM to store
the selected file. Delete any unnecessary
files from flash ROM.
FLASH ROM MODULE
NOT EXIST.
HIT SELECT.
The flash ROM module is not mounted on
that Power Mate i. Put the flash ROM mod-
ule on the board.
I ILLEGAL FORMAT FILE The selected file cannot be read into flash
memory. The selected file or the header in-
formation for flash ROM may have been dam-
aged or destroyed.
ILLEGAL FROM MOD-
ULE.
HIT SELECT KEY.
The flash ROM module ID is illegal. Check
the drawing No. of the flash ROM module.
ILLEGAL SRAM MOD-
ULE.
HIT SELECT KEY.
The SRAM module ID is illegal. Check the
drawing No. of the SRAM module.
L LOADING ERROR.
HIT SELECT KEY.
An error occurred while loading data into
flash ROM.
Do not touch the memory card while loading
data.

Leave a Reply

Your email address will not be published. Required fields are marked *