Fanuc Power Mate i-D/H Operation Maintenance Handbook

1. SCREEN DISPLAY AND OPERATION
57
Cause and ResponseMessage
M MAX EXTENSION OVER.
HIT SELECT KEY.
The extension number added to a file name
exceeds 31. Delete any unnecessary backup
files from the memory card.
MEMORY CARD BAT-
TERY ALARM.
HIT SELECT.
The memory cards battery is exhausted. Re-
place the battery.
MEMORY CARD FULL.
HIT SELECT KEY.
The memory card is full. Delete any unnec-
essary files from the memory card. Alterna-
tively, replace the memory card with another
card having sufficient free space.
MEMORY CARD IS NOT
AVAILABLE. HIT SEL.
The use of this memory card is not sup-
ported. Use only FANUC–recommended
memory cards, as described in the order list.
MEMORY CARD MOUNT
ERROR.
HIT SELECT KEY
The memory card could not be accessed.
Check that the memory card is normal.
MEMORY CARD NOT EX-
IST.
HIT SELECT KEY.
The memory card is not inserted into its slot.
Check that the memory card is pushed fully
home.
MEMORY CARD PRO-
TECTED.HIT SELECT
KEY.
Although writing to the memory card was se-
lected, the write inhibit switch is set. Disable
the write inhibit switch.
MEMORY CARD RESET
ERROR.
HIT SELECT KEY.
Access to a memory card failed. The
memory cards battery may have gone dead,
the memory card may have been damaged
electrically, or the memory card may not be
inserted in the slot securely.
MEMORY CARD WRITE
ERROR.
HIT SELECT KEY.
Access to the memory card has failed.
Check whether the memory card is defective.
Check that the memory cards battery is not
exhusted, that its circuitry has not been dam-
aged, and that it is securely inserted into its
slot.
N NMI OCCURRED.
PLEASE POWER OFF.
A hardware or software error occurred. De-
termine the procedure which causes the er-
ror, and report it to FANUC together with the
series and edition of the boot software.
P PLEASE FORMAT FLASH
TYPE CARD.HIT SEL.
It is not possible to delete only specific files
from a flash ROM card, due to the character-
istics of the memory used. To delete a file it
is necessary to delete all files on the card, by
using the FORMAT function.
R ROM PARITY ERROR:
NC BASIC. HIT SELECT.
The NC BASIC is parity error. Check whether
NC BASIC is in flash ROM, using SYSTEM
DATA CHECK.
S SRAM DATA BACKUP
ERROR.
HIT SELECT KEY.
An attempt to write a backup file to a memory
card failed.
Check that the memory card is normal.
Check that the memory cards battery is not
exhusted, that its circuitry has not been dam-
aged, and that it is securely inserted into its
slot.
SRAM PARITY
OCCURRED.
PLEASE POWER OFF.
A parity error was detected during backup
operation of SRAM (*1).

Leave a Reply

Your email address will not be published. Required fields are marked *