Fanuc Power Mate i-D/H Operation Maintenance Handbook

1. SCREEN DISPLAY AND OPERATION
59
1.4.1 BOOT and INIT operations performed if the DPL/MDI
operation package is used
“BOOTINIT.EXE” executes the BOOT and INIT operations with the following
procedure:
À Start “BOOTIPL.EXE.”
Á Start the Power Mate.
 BOOT operation (including system data loading and user file
backup/restore)
à End the BOOT system. (Select 10.SYSTEM MONITOR EXIT.”)
Ä Select INIT processing. (INIT processing: Maintenance operation,
including memory clear, performed at power–on)
Å End the INIT operation. (The INIT operation automatically ends
after performing processing on the selected item.)
Æ Start the “DPLMDI.EXE” window for the normal operation of the
system.
(3) BOOT SYSTEM screen configuration and operation method
Pressing the ± (or °) key after “BOOTIPL.EXE” has been started
causes the screens shown below to be displayed on the [OPERATION]
area on the screen sequentially.
1. SYSTEM DATA
LOADING.
: Load data into flash memory
2. SYSTEM DATA
CHECK.
: Check the versions of system files
3. SYSTEM DATA
DELETE.
: Delete flash memory files
4. SYSTEM DATA
SAVE.
: Back up a flash memory file to a
memory card
5. FILE DATA
BACKUP/RESTORE.
: Back up and restore the SRAM area
6. MEMORY CARD
FILE DELETE
: Delete a file from a memory card
7. MEMORY CARD
FORMAT.
: Format a memory card
10.SYSTEM MONITOR
EXIT
: End BOOT SYSTEM and start the INIT
operation window.

Leave a Reply

Your email address will not be published. Required fields are marked *