Fanuc Power Mate i-D/H Operator Manual

14. PATTERN DATA INPUT
FUNCTION
PROGRAMMING
(Common to Power Mate i–D and –H)
B–63174EN/03
152
Pressing the
OFFSET
SETTING
key and [MENU] is displayed on the following
pattern menu screen.
[][][][][]
1. BOLT HOLE
2. GRID
3. LINE ANGLE
4. TAPPING
5. DRILLING
6. BORING
7. POCKET
8. PECK
9. TEST PATRN
10. BACK
MENU : HOLE PATTERN O0000 N00000
> _
MDI **** *** *** 16:05:59
MACRO MENU (OPRT)
HOLE PATTERN: This is the menu title. An arbitrary character string
consisting of up to 12 characters can be specified.
BOLT HOLE : This is the pattern name. An arbitrary character
string consisting of up to 10 characters can be
specified, including katakana.
The machine tool builder should specify the character strings for the menu
title and pattern name using the custom macro, and load the character
strings into program memory as a subprogram of program No.9500.
NOTE
This program can be used as a pattern menu item by just
storing it in the specified format into program memory. This
program need not be executed in automatic operation.
14.1
DISPLAYING THE
PATTERN MENU

Leave a Reply

Your email address will not be published. Required fields are marked *