Fanuc Power Mate i-D/H Operator Manual

14. PATTERN DATA INPUT
FUNCTION
PROGRAMMING
(Common to Power Mate i–D and –H)
B–63174EN/03
156
When a pattern menu is selected, the necessary pattern data is displayed
VAR. : BOLT HOLE O0001 N00000
NO. NAME DATA COMMENT
500 TOOL 0.000
501 STANDARD X 0.000 *BOLT HOLE
502 STANDARD Y 0.000 CIRCLE*
503 RADIUS 0.000 SET PATTERN
504 S. ANGL 0.000 DATA TO VAR.
505 HOLES NO. 0.000 NO.500–505.
506 0.000
507 0.000
ACTUAL POSITION (WORK)
X 0.000 Y 0.000
> _
MDI **** *** ***
16:05:59
[][][][][]MACRO MENU (OPRT)
BOLT HOLE : This is the pattern data title. A character string
consisting of up to 12 characters can be set.
TOOL : This is the variable name. A character string
consisting of up to 10 characters can be set.
*BOLT HOLE
CIRCLE* : This is a comment statement. A character string
can be displayed consisting of up to 8 lines, 12
characters per line.
(It is permissible to use katakana
in a character string or line.)
The machine tool builder should program the character strings of pattern
data title, pattern name, and variable name using the custom macro, and
load them into the program memory as a subprogram whose No. is 9500
plus the pattern No. (O9501 to O9510).
NOTE
This program can be used as a pattern menu item by just
storing it in the specified format into program memory. This
program need not be executed in automatic operation.
14.2
PATTERN DATA
DISPLAY

Leave a Reply

Your email address will not be published. Required fields are marked *