Fanuc Power Mate i-D/H Operator Manual

3. HIGH–SPEED RESPONSE
FUNCTION
PROGRAMMING
(Power Mate i–H)
B–63174EN/03
247
Number Contents
1824 The editing of a main program and a sub–program is forbidden
according to the following parameters.
Parameter No.3202#0(NE8),#4(NE9)
Parameter No.3204#3(P8E),#4(P9E)
Ex.) In case only main programs exist
If NE8=1, an error occurs at compiling.
Ex.) In case a sub–programs also exists
In case sub–program numbers are within 8032 to 8999.
(The area of sub–program number is specified by the
parameter No.8691 and No.8692)
If NE8=1, an error occurs at compiling.
In case sub–program numbers are within 8032 to 9999.
If NE8=1 and NE9=1, an error occurs at compiling.
In case sub–program numbers are within 80000000 to
89999999
If NE8=1 and P8E=1, an error occurs at compiling.
In case sub–program numbers are within 90000000 to
99999999.
If NE8=1 and P9E=1, an error occurs at compiling.
1825 Program is protected because the memory protect is enabled.
1826 Background editing is executing.

Leave a Reply

Your email address will not be published. Required fields are marked *