Fanuc Power Mate i-D/H Operator Manual

2. OPERATIONAL DEVICES
B–63174EN/03
OPERATION
314
Number ExplanationName
10 Cursor move keys There are four different cursor move keys.
: This key is used to move the cursor to the right or in the forward
direction. The cursor is moved in short units in the forward direction.
: This key is used to move the cursor to the left or in the reverse
direction. The cursor is moved in short units in the reverse direction.
: This key is used to move the cursor in a downward or forward
direction. The cursor is moved in large units in the forward direction.
: This key is used to move the cursor in an upward or reverse direction.
The cursor is moved in large units in the reverse direction.
11 Page change keys
PAGE
PAGE
Two kinds of page change keys are described below.
: This key is used to changeover the page on the CRT screen in the
forward direction.
: This key is used to changeover the page on the CRT screen in the
reverse direction.
PAGE
PAGE
In the case of 2–path control, be sure to select a desired path for operation
with the path selection switch on the machine operators panel or MDI
keyboard before displaying or setting various data items, editing
programs, or performing any other operations on the keyboard (when
using the Power–Mate i–D2).
Explanation
Keyboard operation for
2–path control

Leave a Reply

Your email address will not be published. Required fields are marked *