Fanuc Power Mate i-D/H Operator Manual

B–63174EN/03
2. OPERATIONAL DEVICES
OPERATION
317
Fig.2.1.3 shows the HANDY OPERATOR’S Panel Standard key
(English).
1 M–OPE/
MDI
Change
key
2 RESET Key
3 Soft key
4 Address/numeric key
5 JOG/
Address key
6 Shift key
7 INPUT Key
8 Cancel key
9 Function key
10 START,
SINGLE,
STOP key
11 Edit key
12 Cursor move key
13 Page key
14 Emergency stop button
15 Dead man’s switch
16 Dead man’s switch enable switch
17 LED
Fig.2.1.3 Handy operator’s panel standard key (English)
Handy Operator’s Panel has the two kinds of modes ”MDI mode” and
”Machine Operation mode” for controls it.
These modes can be exchanged each other by pressing the key of
”M–OPE/MDI” on Handy Operators Panel.
This mode is used the Handy Operators Panel as a display unit. This
operation method is same as CRT/MDI, but some functions are not
available. (Refer to. 2.1.4 Restricted Items). The key have two characters
on there keytop upper and under, the under character on the keytop is
effective.
2.1.3
Handy Operators
Panel
MDI mode

Leave a Reply

Your email address will not be published. Required fields are marked *