Fanuc Power Mate i-D/H Operator Manual

B–63174EN/03
2. OPERATIONAL DEVICES
OPERATION
319
Number ExplanationName
8 CANCEL key
CAN
Press this key to delete the last character or symbol input to the key input buffer.
>N001X100Z_
and the cancel key is pressed, Z is canceled and
>N001X100_
is displayed.
CAN
9 Function keys (MDI mode)
Mode/change key
(M–OPE mode)
AUTO
POS
T–JOG
SYSTEM
...
1. Function keys (the character printed in the under on the keytop.)
Press these keys to switch display screens for each function.
These keys can be operated only MDI mode. See sec. IV–2.2 for details.
2. Mode change key (the character printed in the upper on the keytop.)
These keys can be operated only in the M–OPE mode. The modes are
AUTO, T–JOG, T–STEP and PRG–SEL. Refer to the manual supplied by the
machine tool builder.
10 START, SINGLE, STOP
keys
START SINGLE STOP
These keys can be operated only in the M–OPE mode.
Refer to the manual supplied by the machine tool builder for the operation of the
keys.
11 Program edit keys
ALTER INSRT
DELET
Press these keys when editing the program.
: Alteration
: Insertion
: Deletion
ALTER
DELET
INSRT
12 Cursor move keys There are four different cursor move keys.
: This key is used to move the cursor to the right or in the forward
direction. The cursor is moved in short units in the forward direction.
: This key is used to move the cursor to the left or in the reverse
direction. The cursor is moved in short units in the reverse direction.
: This key is used to move the cursor to the downward or forward
direction. The cursor is moved in large units in the forward direction.
: This key is used to move the cursor to the upward or reverse direction.
The cursor is moved in large units in the reverse direction.
13 Page change keys
PAGE
PAGE
Two kinds of page change keys are described below.
: This key is used to change over the page on the Handy Operators
Panel screen in the forward direction.
: This key is used to change over the page on the Handy Operators
Panel screen in the reverse direction.
PAGE
PAGE

Leave a Reply

Your email address will not be published. Required fields are marked *