Fanuc Power Mate i-D/H Operator Manual

B–63174EN/03
2. OPERATIONAL DEVICES
OPERATION
321
A function key is used to select the corresponding type of display screen
(function). A screen (chapter) of a function can be selected by pressing the
corresponding soft key (chapter selection soft key) after pressing the
function key.
1 Press a function key on the CRT/MDI panel. The chapter selection
soft keys that belong to the selected function appear.
2 Press one of the chapter selection soft keys. The screen for the
selected chapter appears. If the soft key for a target chapter is not
displayed, press the continuous menu key (next–menu key).
In some cases, additional chapters can be selected within a chapter.
3 When the target chapter screen is displayed, press the operation
selection key to display data to be manipulated.
4 To redisplay the chapter selection soft keys, press the return menu
key.
The general screen display procedure is explained above. However,
the actual display procedure varies from one screen to another. For
details, see the description of individual operations.
2.2
FUNCTION KEYS
AND SOFT KEYS
2.2.1
General Screen
Operations
OFFSET
SETTING
PROGPOS
SYSTEM
CUSTOM
GRAPH
MESSAGE
Function keys
(OPRT)
Chapter selection
soft keys
Operation
selection
key
Return menu
key
Continuous menu
key

Leave a Reply

Your email address will not be published. Required fields are marked *