Fanuc Power Mate i-D/H Operator Manual

PROGRAMMING
(Common to Power Mate i–D and –H)
1. GENERAL
B–63174EN/03
18
Coordinate values of command for moving the tool can be indicated by
absolute or incremental designation (See II–8.1).
The tool moves to a point at “the distance from zero point of the
coordinate system” that is to the position of the coordinate values.
B(10,30)
Y
X
Tool
A
Command specifying movement
from point A to point B
G90 X10.0 Y30.0;
Coordinates of point B
Specify the distance from the previous tool position to the next tool
position.
Y
X
A
B
G91 X40.0 Y–30.0 ;
Distance and direction for
movement along each axis
Tool
Command specifying movement
from point A to point B
Y=30
X=40
1.3.3
How to Indicate
Command Dimensions
for Moving the Tool –
Absolute, Incremental
Commands
Explanations
Absolute coordinates
Incremental coordinates

Leave a Reply

Your email address will not be published. Required fields are marked *