Fanuc Power Mate i-D/H Operator Manual

3. MANUAL OPERATION
B–63174EN/03
OPERATION
350
In the handle mode, the tool can be minutely moved by rotating the
manual pulse generator on the machine operators panel. Select the axis
along which the tool is to be moved with the handle feed axis selection
switches.
The minimum distance the tool is moved when the manual pulse
generator is rotated by one graduation is equal to the least input increment.
Or the distance the tool is moved when the manual pulse generator is
rotated by one graduation can be magnified by 10 times or by one of the
two magnifications specified by parameters (No.7113 and 7114).
Manual pulse generator
X
Y
Procedure for Manual Handle Feed
1 Press the HANDLE switch, one of the mode selection switches.
2 Select the axis along which the tool is to be moved by pressing a
handle feed axis selection switch.
3 Select the magnification for the distance the tool is to be moved by
pressing a handle feed magnification switch. The minimum distance
the tool is moved when the manual pulse generator is rotated by one
graduation is equal to the least input increment.
4 Move the tool along the selected axis by rotating the handle. Rotating
the handle 360 degrees moves the tool the distance equivalent to 100
graduations.
The above is an example. Refer to the appropriate manual provided
by the machine tool builder for the actual operations.
3.4
MANUAL HANDLE
FEED
REMOTE
EDIT
HANDLE
MDI
MEMORY
ZERO
RETURN
TEACH
JOG
MODE
Manual pulse generator

Leave a Reply

Your email address will not be published. Required fields are marked *