Fanuc Power Mate i-D/H Operator Manual

4. AUTOMATIC OPERATION
B–63174EN/03
OPERATION
368
The mirror image function can also be turned on and off by setting bit
0 (MIR) of parameter No. 0012 to 1 (on) or 0 (off).
For the mirror image switches, refer to the manual supplied by the
machine tool builder.
The direction of movement during manual operation, the direction of
movement from an intermidiate point to the reference position during
automatic reference position return, and the shift direction (For the Power
Mate i–D) in a boring cycle (G76, G87) cannot be reversed.
Explanations
Restrictions

Leave a Reply

Your email address will not be published. Required fields are marked *