Fanuc Power Mate i-D/H Operator Manual

7. ALARM AND SELF–DIAGNOSIS
FUNCTIONS
B–63174EN/03
OPERATION
389
6 Press the
INPUT
key.
The data value is input and displayed.
> D0100 100
D0101 10
NOTE
The range of values that can be entered in each data format
is as follows:
1 byte of flag bits : 8 independent bits, each only taking
either 0 or 1.
1–byte decimal : –128 to 127
2–bytes decimal : –32768 to 32767
4–bytes decimal : –99999999 to 99999999
PMC data display/setting areas
The following lists the PMC locations where data can be displayed or set.
PMC–SB5 PMC–SB6
X0000 to 0127, X1000 to 1063
Y0000 to 0127, Y1000 to 1063
G0000 to 0255, G1000 to 01255
F0000 to 0255, F1000 to 01255
A0000 to 0024
R0000 to 1499, R9000 to 9117
T0000 to 0079
K0000 to 0019
C0000 to 0079
D0000 to 2999
X0000 to 0127, X1000 to 1063
Y0000 to 0127, Y1000 to 1063
G0000 to 0511, G1000 to 1511
F0000 to 0511, F1000 to 1511
A0000 to 0124
R0000 to 2999, R9000 to 9199
T0000 to 0299
K0000 to 0039, K0900 to 0909
C0000 to 0199
D0000 to 7999

Leave a Reply

Your email address will not be published. Required fields are marked *