Fanuc Power Mate i-D/H Operator Manual

B–63174EN/03
8. DATA INPUT/OUTPUT
OPERATION
417
The contents of the specified file number are read to the memory of CNC.
Reading files
1 Press the EDIT switch on the machine operators panel.
When using the Power Mate i–D2, select a path whose memory is to
hold a read file, with the path selection switch or MDI keyboard.
2 Press function key
PROG
.
3 Press the rightmost soft key
(next–menu key).
4 Press soft key [FLOPPY].
5 Press soft key [(OPRT)].
6 Press soft key [READ]
.
* * * * * * * * * *
READ
FILE NO. =
>_
EDIT
O0001 N00000
(METER) VOL
DIRECTORY (FLOPPY)
NO. FILE NAME
PROGRAM NO. =
11:55:04
0001 PARAMETER
0002 O0001
0003 O0002
0004 O0010
0005 O0040
0006 O0050
0007 O0100
0008 O1000
0009 O9500
58.5
1.9
1.9
1.3
1.3
1.9
1.9
1.9
2.6
[][][][][]
F SET O SET STOP CAN EXEC
7 Enter a file number.
8 Press soft key [F SET].
9 To modify the program number, enter the program number, then press
soft key [O SET].
10 Press soft key [EXEC]. The file number indicated in the lower–left
corner of the screen is automatically incremented by one.
11 Press soft key [CAN] to return to the soft key display shown in the
screen of Fig. 8.8.1.(a).
8.8.2
Reading Files
Procedure (CRT/MDI)

Leave a Reply

Your email address will not be published. Required fields are marked *