Fanuc Power Mate i-D/H Operator Manual

B–63174EN/03
8. DATA INPUT/OUTPUT
OPERATION
419
The file with the specified file number is deleted.
Deleting files
1 Press the EDIT switch on the machine operators panel.
2 Press function key
PROG
.
3 Press the rightmost soft key
(next–menu key).
4 Press soft key [FLOPPY].
5 Press soft key [(OPRT)].
6 Press soft key [DELETE].
EDIT
* * * *
* * * * * *
DELETE
FILE NO. =
>_
O0001 N00000
(METER) VOL
DIRECTORY (FLOPPY)
NO. FILE NAME
NAME=
11:55:51
0001 PARAMETER
0002 O0001
0003 O0002
0004 O0010
0005 O0040
0006 O0050
0007 O0100
0008 O1000
0009 O9500
58.5
1.9
1.9
1.3
1.3
1.9
1.9
1.9
2.6
[][][][][]F SET F NAME CAN EXEC
7 Specify the file to be deleted.
When specifying the file with a file number, type the number and
press soft key
[F SET].When specifying the file with a file name, type
the name and press soft key [F NAME].
8 Press soft key [EXEC].
The file specified in the file number field is deleted. When a file is
deleted, the file numbers after the deleted file are each decremented
by one.
9 Press soft key [CAN] to return to the soft key display shown in the
screen of Fig. 8.8.1(a).
8.8.4
Deleting Files
Procedure (CRT/MDI)

Leave a Reply

Your email address will not be published. Required fields are marked *