Fanuc Power Mate i-D/H Operator Manual

8. DATA INPUT/OUTPUT
B–63174EN/03
OPERATION
438
Data held in CNC memory can be saved to a memory card in MS–DOS
format.
A save operation can be performed using soft keys while the CNC is
operating.
When the bit 0 (MDP) of parameter No.3116 is 1, it is able to use.
S 0 T0000
EDIT **** --EMG-- 12: 15: 00
[FORMAT] [ SAVE ] [ LOAD ] [DELETE] [ ]
READ/PUNCH(M–CARD) O1234 N12345
*1 : CNC memory
CNC RAM
256K byte 2.000M byte S-RAM
*2 : Memory card size and type
File
( 1/ 1)
SRAM256A. FDB 262144 byte 97/01/23
*3 : Names, sizes, dates, and number of
files recorded on the memory card
COMPLETED. *4 : Operation message
TURN OFF POWER.
[ CAN ] [ ] [ ] [ CAN ] [ EXEC ]
When [FORMAT], [SAVE], or [DELETE]
is selected
Memory card
Message
The CNC memory size (*1) is displayed at all times.
When no memory card is inserted, the message field (*4) displays a
message prompting the user to insert a memory card, but does not
display the memory card states (*2 and *3).
If an inserted memory card is invalid (if there is no attribute memory,
or if the attribute memory does not contain any device information),
the message field (*4) displays an error message, but does not display
the memory card states (*2 and *3).
8.9.7
Memory Card Output

Leave a Reply

Your email address will not be published. Required fields are marked *