Fanuc Power Mate i-D/H Operator Manual

B–63174EN/03
8. DATA INPUT/OUTPUT
OPERATION
441
Before a file can be saved to a memory card, the memory card must be
formatted.
Formatting a memory card
1 Press the rightmost soft key (next–menu key) on the ALL IO
screen, described in Section 8.9.1.
2 Press soft key [M–CARD].
3 Place the CNC in the emergency stop state.
4 When a memory card is inserted, the state of the memory card is
displayed as shown below.
S 0 T0000
EDIT **** --EMG-- 12: 15: 00
[FORMAT] [ SAVE ] [ ] [DELETE] [ ]
READ/PUNCH(M–CARD) O1234 N12345
CNC RAM
256K byte 2.000M byte S-RAM
File ( 1/ 1)
SRAM256A.FDB 262144 byte 02/01/23
Select : All data
Memory card
Message
5 Press soft key [FORMAT].
6 A message prompting the user to confirm the operation is displayed.
Press soft key [EXEC] to execute the formatting operation.
7 As formatting is being performed, the message “FORMATTING”
blinks.
8 Upon the completion of formatting, the message “COMPLETED” is
displayed in the message field.
Memory card formatting
Procedure
EXECCAN

Leave a Reply

Your email address will not be published. Required fields are marked *