Fanuc Power Mate i-D/H Operator Manual

8. DATA INPUT/OUTPUT
B–63174EN/03
OPERATION
442
Unnecessary saved files can be deleted from a memory card.
Deleting files
1 Press the rightmost soft key (next–menu key) on the ALL IO
screen, described in Section 8.9.1.
2 Press soft key [M–CARD].
3 Place the CNC in the emergency stop state.
4 When a memory card is inserted, the state of the memory card is
displayed as shown below.
S 0 T0000
EDIT **** --EMG-- 12: 15: 00
[FORMAT] [ SAVE ] [ ] [DELETE] [ ]
READ/PUNCH(M–CARD) O1234 N12345
CNC RAM
256K byte 2.000M byte S-RAM
File ( 1/ 1)
SRAM256A.FDB 262144 byte 02/01/23
Select : All data
Memory card
Message
5 Press soft key [DELETE].
6 With cursor keys
and , select the file to be deleted from the
memory card.
7 After checking the file selection, press soft key [EXEC].
8 As detection is being performed, the message “DELETING” blinks in
the message field.
9 Upon the completion of deletion, the message “COMPLETED” is
displayed in the message field
Deleting files
Procedure
EXECCAN

Leave a Reply

Your email address will not be published. Required fields are marked *